Using the proven components from the WEVO SS Engine mounts, the C2 SS Engine mounts are designed to replace 1990 to 1998 C2 engine mounts.

These C2 SS Engine mounts offer more precise location than the factory RS mounts - and do so at a lower price.  An ideal compromise between the harshness of solid mounts and the cost of the factory RS mounts.

The kit includes the correct M12 bolt to install these mounts as replacements for the Hyrdoelastic O.E. mounts (that uses an integral stud).

The C2 SS mount can also be used on the 996 series chassis and the 996 based GT3 cars – however – a longer bolt is required than the unit provided with the kit.

Also available with optional SS Black Pillows by request.

Technical Note: The M12 bolt through the Engine or Transmission mount should be tightened to 40 ft/lbs or 55 Nm. The M12 Schnorr (serrated) washer should be installed directly under the head of the M12 bolt. The M8 hardware should be tightened to 18 ft/lbs or 25 Nm using the original arrangement of washer and nut.